2. Measure the thickness of the pad at the point of greatest wear:
- nominal thickness – 4.4 mm;
- minimum thickness – 1.0 mm.
3. If the lining thickness is less than the minimum or uneven wear is observed, the brake pads must be replaced.
Attention! Brake pads must be changed on both the left and right sides of the vehicle to prevent uneven braking of the right and left wheels.
4. If there is a significant difference in the degree of wear (thickness) of the brake linings on the left and right wheels, then it is necessary to check the operation of the piston of the working brake cylinder.
The material was copied from the website MITSUBISHIMAN