Depending on the design of the vehicle, the spare wheel can also be located in a safe box under the load platform on open-deck vehicles.
The spare wheel in the trunk is bolted to the left side wall. To remove the wheel, unscrew the fixing screws by hand.
For safety reasons, the spare wheel must always be firmly screwed on while driving.
To remove the spare wheel from under the floor of the vehicle, using a wheel wrench, unscrew the hex bolt and pull on the hook.
Carefully! "Bowl" spare wheel falls down - risk of injury!
Then pull the wheel forward.
Indication
On vehicles with a front spoiler, it may be necessary to reduce the load on the front of the vehicle before removing the spare wheel. If necessary, you can use a car jack to slightly raise the front of the car or remove the spoiler.
To reinstall the spare wheel using the key,
used for mounting wheels, slide the spare wheel down by "bowl" and turn with a strong jerk "bowl" up until the hook is engaged. Then screw in the hex bolt again and tighten until it stops.
For safety reasons, the spare wheel carrier must always be screwed on to prevent accidental unlocking "bowls" spare wheel.