Contents: Removal ⤓ Installation ⤓
Removal
With the vehicle on the ground, loosen the central nut securing the wheel hub.
Raise the car evenly from the front so that the stabilizer is not under tension.
Remove the wheel.
Remove the brake hose retainer.
After unscrewing the bolt, remove the front wheel speed sensor (vehicles with ABS).
After unscrewing the nut, disconnect the anti-roll bar.
Hang the lower control arm with wire to the car body.
Loosen the nuts and remove the two bolts securing the strut to the steering knuckle.
Separate the front strut and steering knuckle.
Remove the three nuts securing the upper part of the front suspension strut to the body.
Remove the front suspension strut assembly from under the vehicle fender.
Check for fluid leaks from the shock absorber strut.
Installation
Installation is carried out in reverse order, taking into account the following.
The original was published on the website: mitsubishiman.ru
After installation, adjust the front wheel alignment angles.