Contents: Removal ⤓ Installation ⤓
Removal
Loosen the self-locking upper nuts.
After installing the jack under the lower suspension arm, unscrew the fastening elements.
Loosen and remove the bolt connecting the lower arm and the longitudinal arm.
Loosen and remove the bolt connecting the rear shock absorber assembly and the lower arm.
Remove the rear pillar assembly from under the vehicle arch.
Check rubber parts for wear and cracks.
Check the shock absorber for any faults, fluid leaks or extraneous noise during operation.
The original article was published on [MitsubishiMan]
Installation
Installation is carried out in reverse order.
CAUTION: The final tightening of the rear suspension nuts is carried out after the vehicle has been lowered to the ground.