For extreme adjustment, the following operations must be performed:
Remove the gas pedal assembly.
Loosen the accelerator pedal position sensor mounting bolts (2).
Make sure that the accelerator pedal lever (1) is in contact with the pedal travel limiter (3).
Turn the ignition key to the ON position, but do not start the engine.
By turning the gas pedal position sensor housing, achieve a position in which the sensor output voltage lies within the required values.
The article is reprinted from this source: www.mitsubishiman.ru
The required value is 0.985-1.085 V.
Tighten the sensor mounting bolts.
Reinstall the gas pedal assembly.