Throttle Body — Checking and Cleaning (Mitsubishi Colt 4)

After starting the engine, warm it up to operating temperature, and then turn it off.

Disconnect the inlet hose from the throttle body.

Spray the cleaner inside the throttle body through the intake manifold and wait 5 minutes.

After starting the engine, press and release the accelerator pedal several times, then let the engine idle for 1 minute.

If the deposits and scale in the throttle body are not removed, repeat the cleaning.

Connect the inlet hose.

Using a tester or by disconnecting the ground cable from the battery, erase the fault code from the memory. Wait 10 seconds or more, then start the engine and let it idle for 10 minutes.

[The original can be found on the website: mitsubishiman.ru]