2. Remove air from the hydraulic system and then, with the vehicle stationary, turn the steering wheel several times so that the temperature of the working fluid rises to 50-60°C.
3. Start the engine and let it idle.
4. Disconnect the sensor-switch connector and connect an ohmmeter to this connector.
5. Smoothly closing the shut-off valve and increasing the working pressure, check the value of the operating pressure of the sensor switch.
Nominal value:
- Car with engine capacity 3800: 1.65-2.0 MPa
- Car with engine capacity 3200: 1.5-2.0 MPa
6. Smoothly open the shut-off valve and reduce the working pressure; then check the lower pressure threshold of the sensor switch.
Nominal value:
- Vehicle with engine capacity 3800: 1.2 MPa or more
- Car with engine capacity 3200: 0.5-2.0 MPa
(The material was borrowed from the website: mitsubishiman)
7. Disconnect the measuring instruments and tighten the hydraulic system hoses to the specified torque of 57±7 Nm.
8. Remove air from the hydraulic system.