Contents: Early models ⤓ Late models ⤓
1. Wiper blades and arms should be inspected periodically for signs of wear or damage. Wash the blades regularly with a mild soap solution to remove oil film and check the reliability of the fasteners.
Early models
2. Lift the wiper arm off the glass, lift the release lever and remove the blade from the arm. Remove the clip from the edge of the blade using a small screwdriver and remove the rubber insert. Install the new insert in place.
Late models
3. Lift the wiper arm off the glass, press the retaining tab and remove the blade from the arm. Bend the edge of the rubber element with needle-nose pliers and remove the two rods. Then remove the rubber element from the frame. Install the new rubber element on the frame and insert the two rods to secure it.
9.2a Lift the release lever and remove the blade from the wiper arm
9.2b Using a small screwdriver, remove the clip from the edge of the brush, then remove the rubber insert
The article was taken from the website MITSUBISHIMAN.ru
9.3a Press the fastening tab and remove the brush from the lever
9.3b Using needle-nose pliers, remove the two rods from the brush
9.3v Then remove the rubber insert from the frame