8.2 The following tools are required to change the engine oil and oil filter
1. Drip pan 2. Rubber gloves 3. Long handle 4. Cap head 5. Special wrench for removing the oil filter 6. Special wrench for installing the oil filter
2. Prepare all the necessary tools and materials before starting work (8.2).
3. Warm up the engine to normal operating temperature. Raise the car, unscrew the drain plug, and drain the oil.
4. Clean the plug and the area around the drain hole and replace the plug.
5. Having installed the pallet under the oil filter, unscrew it.
6. Lubricate the gasket of the new filter with engine oil and install it in place, tightening to the required torque.
7. Pour approximately 4.0 liters of new engine oil into the engine. Wait a few minutes and check the oil level.
8.3 Using a ring wrench, unscrew the drain plug
8.5 A special wrench is required to remove the oil filter - do not use it to screw in a new filter
8.6 Lubricate the oil filter gasket with clean engine oil before installing the filter