Oil pump and sump — design description (Mitsubishi Colt 5)

The oil pump and engine sump are shown in Figure 3.62.

Figure 3.62. Oil pump and engine sump: 1 - Oil filter; 2 - Threaded drain plug; 3 - Seal; 4. Gearbox support; 5 - Pallet; 6 - Oil receiver; 7 - Gasket; 8 - Pressure reducing valve; 9 - Pressure reducing valve spring; 10 - Pressure reducing valve piston; 11 - Front shaft seal; 12 - Front cover; 13 - Sealing ring; 14 - Oil pump cover; 15 - Oil pump outer rotor; 16 - Inner rotor of the oil pump.

Original material on the website: MitsubishiMan.ru

This article is available at: russian, bulgarian, belarusian, ukrainian, serbian, croatian, romanian, polish, slovak, hungarian

This article was reviewed by: Peter Ermakov

Share with friends:

◀ Previous

Colt 5: 4G1 engines since 1995

Next ▶

Main Bearing Caps — Installation
Main Bearing Shells — Installation
Cylinder Block — Check
Crankshaft and cylinder block
Connecting rod bearings — check

Oil pump and pan — check
Tightening torques for elements and parts of 4G1 engines
Changes in the design of 4G1 engines since 2001
Changes in the design of the intake and exhaust manifold since 2001

Similar materials for other Mitsubishi models