Door glass and window lifter (Mitsubishi Carisma)

Front door

Removal

1. Remove the front door trim and waterproof film.

Fig. 17.17. Glass and window lifter of the front door: A - cars with manual windows; B – cars with electric windows; a – lubrication point; 1 – window lift assembly; 2 – outer door glass seal; 3 – front door glass; 4 – inner door glass seal; 5 – Front door glass holder

2. Remove the inner seal 4 (Fig. 17.17) of the door glass.

3. Loosen the screw and remove the outer seal 2 of the door glass.

4. Lower the glass halfway and use adhesive tape to secure it in this position.

5. Unscrew the two screws securing the glass holders and remove the glass from the door through the window opening.

6. Loosen the four screws and remove the window regulator 1 assembly.

Installation

Installation is carried out in the reverse order of removal.

Back door

Removal

1. Remove the rear door trim and waterproof film.

Fig. 17.18. Glass and window lifter of the front door: A - cars with manual windows; B – cars with electric windows; a – lubrication point; 1 – outer door glass seal; 2 – door glass guide groove; 3 – rear door glass; 4 – rear fixed glass and seal assembly; 5 – rear fixed door glass seal; 6 – fixed rear door glass; 7 – rear door glass central guide; 8 – inner door glass seal; 9 – window lift assembly

2. Remove the inner seal 8 (Fig. 17.18) of the door glass.

3. Loosen the screw and remove the outer seal 1 of the door glass.

4. Remove groove 2 of the door glass guide.

5. Lower the glass halfway and use adhesive tape to secure it in this position.

6. Unscrew the two screws securing the glass holders and remove glass 3 from the door through the window opening.

7. Unscrew the four screws and remove the window regulator 9 as an assembly.