Elements of the gearbox control mechanism for models of later years of production
1, 5 - connection of the gear shift cable; 2, 6 - connection of the gear selection cable; 3 - latch; 4 - bracket; 7 - gear lever housing; 8 - bushing; 9 - spacer sleeve.
Removing
Remove the air filter assembly.
Pull up to remove the shift knob.
Remove the bushing and front floor console assembly.
Disconnect the selector cable from the shift lever.
After removing the retainer, disconnect the shift cable.
After removing the cotter pins, disconnect the gear selection and gear shift cables, remove them.
Installation
Installation is carried out in the reverse order, taking into account the following:
Install the shift lever (1) on the gearbox and the gearshift lever in the passenger compartment to the neutral position (2).
From the gearbox side, identify the gearshift and gear selection cable lugs from the marks.
Secure them with cotter pins.
After moving the gear lever to all operating positions, check its operation.
Switching should be smooth and without jamming.